Differences

This shows you the differences between two versions of the page.

--- carts:nec [2022/03/31 02:59] – updated submission links hiccup
+++ carts:nec [2023/03/07 00:41] (current) – cartridge_hermit
@@ Line 1: / Line 1: @@
 ====== TurboGrafx-16 / PC Engine ======
 {{wst>see_hardware_page}}
+{{wst>vgpc_help}}
 ===== Introduction =====
+The specialized wafer-thin carts for the TurboGrafx-16 and PC Engine, called HuCards or TurboChips, can be dumped with a few different tools. The cheapest options are using a RetroBlaster or Tototek Tengu.
-The specialized wafer-thin carts for the TurboGrafx-16 and PC Engine can be dumped with multiple different tools, some readily available although perhaps a bit expensive.
+{{wst>carts_important_notes}}
 ===== Methods =====
-  - [[#Method 1 - SSDS3|Super System SD 3 (SSDS3)]]
+  - [[#RetroBlaster]]
-  - [[#Method 2 - RetroFreak|RetroFreak]]
+  - [[#Super System SD 3 (SSDS3)]]
-  - [[#Method 3 - Tototek USB Tengu PC Engine Flash Cart and Dumper|Tototek USB Tengu PC Engine Flash Cart and Dumper]]
+  - [[#RetroFreak]]
+  - [[#Tototek USB Tengu PC Engine Flash Cart and Dumper]]
-==== Method 1 - SSDS3 ====
-If you have an SSDS3, you can follow [[https://retrogamesultra.com/2021/03/15/dumping-pc-engine-hucards-turbografx-turbochips-with-the-ssds3/|this method for dumping PC Engine HuCards / TurboGrafx TurboChips]] ([[https://archive.is/xFDCD|archive link]]).
+==== RetroBlaster ====
+{{wst>community_equipment}}
-==== Method 2 - RetroFreak ====
+The RetroBlaster software currently only supports Windows and is available on the [[https://github.com/retrostage/RetroBlaster|RetroBlaster github]].
+{{:carts:sega:rertoblaster_5v.jpg|}}
+Make sure the RetroBlaster voltage switch is set to 5V (not the 3V setting).
+Connect the PC Engine adapter to the RetroBlaster. To seat the adapter, firmly but gently push the adapter in until the pins are no longer showing.
+{{:carts:retroblaster_pce.png|}}
+Insert the HuCardinto the adapter, with the label side facing up.
+Open the RetroBlaster software (click Run if you see a security warning about the publisher not being verified) and navigate to the TG-16/PCE tab.
+{{:carts:retroblaster_pcengine.png?600|}}
+For North American TurboGrafix-16 cards, select "Dump TG16 HuCard", otherwise select "Dump PCE HuCard" for games released in the rest of the world. Choose the location and filename for saving the ROM.
+The activity LED will turn on on the RetroBlaster board. A progress bar will indicate the status of the dump, and information will be displayed on the 'status' log when the dump is complete, which usually takes a few seconds.
+==== Super System SD 3 (SSDS3) ====
+The Super SD System 3 can also be used to dump games. You can follow [[https://retrogamesultra.com/2021/03/15/dumping-pc-engine-hucards-turbografx-turbochips-with-the-ssds3/|this method for dumping PC Engine HuCards / TurboGrafx TurboChips]] ([[https://archive.is/xFDCD|archive link]]).
+==== RetroFreak ====
 See [[carts:nintendo:nes|instructions here for NES / Famicom dumping using the RetroFreak]], the same setup applies to dumping TurboGrafx-16 and PC Engine cards.
-==== Method 3 - Tototek USB Tengu PC Engine Flash Cart and Dumper ====
+==== Tototek USB Tengu PC Engine Flash Cart and Dumper ====
-[[http://www.tototek.com/store/index.php?main_page=product_info&products_id=200|This neat package]] ([[https://archive.is/V7PdF#|archive link]]) comes with both a dumper and a flash cart, and uses a super simple Windows application to show information about the cart, dump the cart, and flash the flash cart.
+[[http://www.tototek.com/store/index.php?main_page=product_info&products_id=200|This neat package]] ([[https://archive.is/V7PdF#|archive link]]) comes with both a dumper and a flash cart, and uses a super simple Windows application to show information about the cart, dump HuCards, and write to the flash cart.
 ===== Gathering and Submitting Dump Info =====
-See [[submission:general|Gathering and Submitting Dump Info (Basic)]]
+{{wst>see_submission_page}}