Differences

This shows you the differences between two versions of the page.

--- carts:nintendo:n64 [2022/05/03 20:42]
hiccup
+++ carts:nintendo:n64 [2022/06/07 02:10]
sadikyo [Method 5 - RetroBlaster 2.0 + N64 (Pro) adapter]
@@ Line 3: / Line 3: @@
 **Warning: UltraSave + 64drive may produce bad dumps of NUS-8F16FB-02 development boards.**
+{{wst>vgpc_help}}
 ===== Introduction =====
@@ Line 56: / Line 58: @@
 ==== Method 5 - RetroBlaster 2.0 + N64 (Pro) adapter ====
-Retroblaster 2.0 has the "N64" and "N64 Pro" adaptors. The latter is advertised as being able to dump prototype carts. Make sure to set the dumper to 3V.
+Retroblaster 2.0 has a standard "N64 Adapter" and a "N64 Adapter Pro." The latter is needed to dump prototype carts, whereas the former can be used for standard carts.
+  - Make sure the '3V' setting is selected on the device (not the '5V' setting)
+  - Connect the appropriate adapter to the Retroblaster
+  - Insert the cartridge or PCB into the adapter
+  - Open the RetroBlaster software, available on the [[https://github.com/retrostage/RetroBlaster|RetroBlaster github]]
+  - Navigate to the 'N64' tab, and click "Dump ROM."  Choose the location and filename for your ROM
+  - A progress bar will indicate the status of the dump, and information will be displayed on the 'status' log when the dump is complete
+  - You can also dump the SRAM or EEPROM from this same tab, by clicking the appropriate button
 ==== Method 6 - GameShark ProAction Replay Pro ====