Differences

This shows you the differences between two versions of the page.

--- carts:nintendo:n64 [2022/06/07 02:01]
sadikyo [Method 5 - RetroBlaster 2.0 + N64 (Pro) adapter]
+++ carts:nintendo:n64 [2022/06/20 12:38]
hiccup [Introduction]
@@ Line 7: / Line 7: @@
 ===== Introduction =====
-{{wst>factory_save}}
+{{wst>carts_important_notes}}
 Dumping Nintendo 64 carts is pretty easy if you have one of the dedicated hardware solutions for it, but they can sometimes be hard to come by, or out of stock, or you have to build them yourself.
@@ Line 58: / Line 58: @@
 ==== Method 5 - RetroBlaster 2.0 + N64 (Pro) adapter ====
-Retroblaster 2.0 has the "N64" and "N64 Pro" adaptors. The latter is advertised as being able to dump prototype carts. Make sure to set the dumper to 3V.
+Retroblaster 2.0 has a standard "N64 Adapter" and a "N64 Adapter Pro." The latter is needed to dump prototype carts, whereas the former can be used for standard carts.
+  - Make sure the '3V' setting is selected on the device (not the '5V' setting)
   - Connect the appropriate adapter to the Retroblaster
   - Insert the cartridge or PCB into the adapter
-  - Open the RetroBlaster software, available on the [[https://github.com/retrostage/RetroBlaster|RetroBlaster github]]
+  - Open the RetroBlaster software (available on the [[https://github.com/retrostage/RetroBlaster|RetroBlaster github]])
-  - Navigate to the 'N64' tab, and click "Dump ROM."  A progress bar will indicate the status of the dump
+  - Navigate to the 'N64' tab, and click "Dump ROM."  Choose the location and filename for your ROM
+  - A progress bar will indicate the status of the dump, and information will be displayed on the 'status' log when the dump is complete
   - You can also dump the SRAM or EEPROM from this same tab, by clicking the appropriate button