This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<span class="iconify mr-1 svg-loading" data-icon="mdi:arrow-left"></span>====== Sega Mega Drive / Genesis ====== {{wst>see_hardware_page}} {{wst>vgpc_help}} ===== Introduction ===== There are numerous dumping tools available for the Sega Mega Drive / Genesis games, several for sale and many, many more open source electronics projects. 32x games can be dumped like normal carts, but for Sega CD games you can use the [[discs:general|general disc dumping guide]]. The cheapest option is a RetroBlaster, followed by the Retrode2. {{wst>carts_important_notes}} ===== Methods ===== - [[#RetroBlaster 2.0 + Genesis Adapter]] - [[#Retrode2]] - [[#Open Source Cartridge Reader]] - [[#RetroFreak]] ==== RetroBlaster 2.0 + Genesis Adapter ==== {{wst>community_equipment}} The RetroBlaster software currently only supports Windows and is available on the [[https://github.com/retrostage/RetroBlaster|RetroBlaster github]]. {{:carts:sega:rertoblaster_5v.jpg|}} Make sure the RetroBlaster voltage switch is set to 5V (not the 3V setting). Connect the Genesis adapter to the RetroBlaster. To seat the adapter, firmly but gently push the adapter in until the pins are no longer showing. {{:carts:sega:genesis_retroblaster.jpg|}} Insert the cartridge or PCB into the adapter, with the cartridge label facing the activity LED. Open the RetroBlaster software (click Run if you see a security warning about the publisher not being verified) and navigate to the Genesis tab. {{:carts:sega:retroblaster_software_genesis.png|}} Click "Dump ROM." Choose the location and filename for your ROM. The activity LED will turn on on the RetroBlaster board. A progress bar will indicate the status of the dump, and information will be displayed on the 'status' log when the dump is complete. You can also dump the SRAM from this same tab, by clicking the "Dump SRAM" button. ==== Retrode2 ==== This is a super simple system that works really well, and is affordable and readily available. See our [[tools:hardware|hardware page for shop links]]. - Plug your game into the Retrode2. - Make sure the voltage is set to 5V. - Connect the Retrode2 to your computer. - The Retrode2 should now show up as a regular USB drive, and you can copy the ROM from there for further analysis. ==== Open Source Cartridge Reader ==== The Open Source Cartridge Reader (OSCR) comes with Mega Drive / Genesis dumping capabilities by default. Visit the [[https://github.com/sanni/cartreader/wiki/Reading-Mega-Drive-Genesis-games|OSCR wiki]] for proper settings, and dumping instructions. ==== RetroFreak ==== See [[carts:nintendo:nes|instructions here for NES / Famicom dumping using the RetroFreak]], the same setup applies to dumping Sega Mega Drive / Genesis. ===== Opening carts ===== Most games use 4.5mm Gamebit screws, but less commonly use T3 (1.20mm) security torx or (rarely) tri-groove screws. After removing the screws, lift the back off and remove the PCB from the two pegs. ===== Gathering and Submitting Dump Info ===== {{wst>see_submission_page}}