Differences

This shows you the differences between two versions of the page.

--- template:aurokku [2026/10/25 18:56] – lnrc
+++ template:aurokku [2026/10/29 22:54] (current) – lnrc
@@ Line 1: / Line 1: @@
-auRokku is a collection of tools for managing the UIM lock on [[phones:kddi|au]] phones. It enables you to look at the app list and other features on au phones that are locked when you don't possess the phone's original UIM.
+[[https://github.com/saga0324/auRokku|auRokku]] is a collection of tools for managing the UIM lock on [[phones:kddi|au]] phones. It enables you to look at the app list and other features on au phones that are locked when you don't possess the phone's original UIM.
-**Removing the UIM Lock**
+===Removing the UIM Lock===
 The first time using auRokku, make sure to install necessary libraries:
@@ Line 10: / Line 10: @@
   - You should now be able to read the list of apps and other restricted features. Note that the apps themselves will still be locked to the original UIM, and will not be bootable on the phone if you are using a different UIM.
-**Troubleshooting**
+===Troubleshooting===
-If you receive an error from auRokku, there is a good chance that the program was unable to determine your phone's correct serial number. Here are steps to fix this issue.
+If you receive an error from auRokku, try the following:
+**Serial Number Issue**
+If auRokku says it cannot determine your device's serial number or you get an arbitrary error like 00 53, you can give auRokku your phone's serial number.
   - Note down the serial code on the inside of your phone underneath the battery. Set this information aside.
   - Use the following command to unlock the phone, replacing the text in <> with your device's specific IDs.<code>python3 auRokku.py --vid <vid> --pid <pid> --op clearlk --sn <serial number></code>Example: <code>python3 auRokku.py --vid 0930 --pid 0d1c --op clearlk --sn STSDF****</code> (sample serial number is censored for security)
   - Proceed with steps 3 and 4
+**Permissions Issue**
+If you get a permission denied error, try running the same command using sudo
+<code>sudo python3 auRokku.py --vid <vid> --pid <pid> --op clearlk</code>
+**USB Endpoints Issue**
+If auRokku notifies you of a USB endpoint issue, or if the previous troubleshooting steps did not work, try the following steps.
+  * Probe the USB endpoints with --op probe. You may need to use sudo and add the serial number as listed in the previous troubleshooting steps<code>sudo python3 auRokku.py --vid <vid> --pid <pid> --op probe</code>You should receive an output that looks like this
+<code>➜  auRokku git:(main) python3 auRokku.py --vid 1967 --pid 1002 --op probe
+============================================================
+  Operation: probe
+============================================================
+  Result Status : SUCCESS
+  Device        : 0x1967:0x1002
+  Probe Type    : list
+  Bulk Pairs    :
+    cfg 1 if 1 alt 0 OUT 0x02 IN 0x82
+    cfg 1 if 2 alt 0 OUT 0x05 IN 0x85
+============================================================</code>
+  * Add the endpoints as arguments
+Example:
+<code>python3 auRokku.py --vid 1967 --pid 1002 --sn SHICH****** --interface 2 --ep-out 05 --ep-in 85 --op clearlk</code>