template:fsr_ii

NOTE: This extraction method may not work on WSL. If you are having errors after trying all steps, try switching from WSL to a full Linux installation.

  1. Download fs-tools from Github
  2. Set up the environment with the following commands
    sudo apt install gcc-arm-linux-gnueabi
    pip3 install qiling
  3. Build the tool with the following commands
    arm-linux-gnueabi-gcc -static -omain fsr.ko fsr_stl.ko main.c
  4. Place onenand.bin and onenand.oob into the fsr_II folder. Then, run the following command
    python3 emu.py
  • template/fsr_ii.txt
  • Last modified: 2025/03/30 06:11
  • by lnrc